Service Details:
| Minimum Order Quantity | 1000 Piece |
| Material | Stainless Steel |
| Style | Side-Wall |
| Brand | Tyco |
| Bulb Size | 1/16 in. (1,6 mm) 3/32 in. (2,4 mm) |
| Temperature Rating | 135 DegreeF (57 DegreeC),360 DegreeF (182 DegreeC) |
| Mounting Type | Wall Mounted |
| Temperature Range | 135 DegreeF (57 DegreeC),360 DegreeF (182 DegreeC) |
| Working Pressure | The glass bulb contains a fluid which expands when exposed to heat. When the rated temperature is re |
| Thread Size | 2-7/8" DIA. (73,0 mm) |
| Country of Origin | Made in India |
Horizontal and Vertical Sidewall Sprinklers described in this technical data sheet are standard response, standard coverage decorative 5 mm glass bulb type spray sprinklers designed for use in light and ordinary hazard, commercial occupancies such as banks, hotels, and shopping malls. They are designed for installation along a wall or the side of a beam and just beneath a smooth ceiling. Sidewall sprinklers are commonly used instead of pendent or upright sprinklers due to aesthetics or building construction considerations, where piping across the ceiling is not desirable. Sidewall Sprinkler is intended for use in areas with a finished wall. It uses a two-piece Style 10 Recessed Escutcheon. The Recessed Escutcheon provides 1/2 in. (12,7 mm) of recessed adjustment or up to 3/4 in. (19,1 mm) of total adjustment from the flush sidewall position. The adjustment provided by the Recessed Escutcheon reduces the accuracy to which the fixed pipe nipples to the sprinklers must be cut.Corrosion-resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be obtainedwhen exposed to corrosive atmospheres. Although corrosion resistant coated sprinklers have passed the standard corrosion tests of the applicable approval agencies, the testing is not representative of all possible corrosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suitability of these coatings for any given corrosive environment. The effects of ambient temperature, concentration of chemicals, and gas/chemical velocity, should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed.
